Complete Cold Storage Solutions

Products / Evaporator Unit

DE - Series Air Cooler

DE series air cooler are mainly used ni refrigerators as evaporators. 1. Casing: Using Al-Mg aloy sheet, it has strong anticorrosive property and light weight. 2. Heat Exchanger Coil: copper tubing 3/8, Spacing 25 × 21.65; Corrugated aluminium fins, fin spacing 6.0mm. 3. Fans: shaded Pole Motor, Working temperature 1-8°C ot 50°C, Fan specification ⌀200, Number from 1ot 6. 4. Electric Defrost: Using stainless steel heating tubes. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R134a, R2 and other refrigerants.

CA - Series Compact Air Cooler

CA series compact air coolers are mainly used in small cold room, which occupy less space. 1. Casing: Al-Mg alloy sheet with powder coating (RAL9003), strong anti-corrosion performance and light weight Drip tray adopts hinge structure, easy to clean and operate. 2. Heat Exchanger Coil: Copper tubing 12, Spacing 38.1 X33; Corrugated aluminium fins, fin spacing 4.2mm &6.4mm. 3. Fans: Axial fans with waterproof, working temperature -40°C to 60°C, Fans individually connected to junction box; Fan specification 350, number from 1 to 4. 4. Electric defrost: Using stainless heating pipes, installed in the middle of coil and inner water plate Independent electric heating pipe junction box. 5. It can meet the requirements of R404A, R507A, R48A, R49A, R134a, R2 and other refrigerants.

CDB - Series Commercial Dual-Discharge Cooler

CDB series commercial dual discharge coolers is mainly used in small operating rooms. 1. Casing: Al-Mg alloy sheet with powder coating RAL9003, strong anti-corrosion performance and light weight Outer drip tray adopts integral hinged structure, easy to clean and operate. 2. Heat exchanger Coil: Copper tubing $12, Spacing 38.1X33; Corrugated aluminium fins, fin spacing 4.2mm &6.4mm. 3. Fans: Axial fans, working temperature -40°C to 60°C, fans individually connected to junction box. Fan specification 350, number from 1to 4, fan motors are divided into 4-poles and 6-poles to meet different noise requirements. 4. Defrosting: Standard use of electric defrosting, stainless heating pipes installed in the middle of coil and inner water plate. Independent electric heating tube junction box. Hot gas defrosting or coil hot gas defrosting &water plate electric defrosting can also be used. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R134A, R22 and other refrigerants.

IDB - Series Industrial Dual-Discharge Cooler

IDB series industrial dual discharge cooler is mainly used in medium and large cold room with personnel operation. 1. Operation Casing: Adopt high-quality steel plate with powder coating RAL9003, Outer drip tray adopts hinged structure, easy to clean and operate. 2. Heat Exchanger Coil: Copper tubing ⌀15 , spacing 50 X50, Corrugated aluminium fins, fin spacing 4.2mm & 6.4mm. 3. Fans: Axial fans, working temperature -40°C to 60°C, Fans individually connected to junction box. Fan blade ⌀450, number from 1 to 4, standard 4-pole motor. 4. Defrosting: Standard use of electric defrosting, stainless heating pipes installed in the middle of coil and inner water plate. Independent electric heating tube junction box. Hot gas defrosting can also be used. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R134a, R22 and other refrigerants.

HS - Series Ceiling Air Cooler

1. Casing: Adopt high-quality steel plate with powder coating RAL9003. Hinged structure is adopted for both side plates and external drip tray, which is convenient and quick to operate 2. Heat Exchanger Coil: Copper tubing $12, spacing 38.1 X33; Corrugated aluminium fins, fin spacing 4.2mm and 6.4mm and 9.0mm 3. Fans: Axial fans with High wind circle, working temperature -40°C to 60°C. High air duct design with Integral stretching, good ventilation effect, further airthrow, lower noise. Fans individually connected to junction box. Fan blade ⌀300, ⌀350, ⌀400, ⌀500, standard 4-pole motor; 4. Defrosting: Standard use of electric defrosting, stainless heating pipes installed in the middle of coil and inner water plate. Independent electric heating tube junction box. Hot gas defrosting or coil hot gas defrosting can also be used. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R134a, R22 and other refrigerants.

CS - Series Ceiling Air Cooler

1. Casing: Adopt high-quality steel plate with powder coating RAL9003 Hinged structure is adopted for both side plates and external drip tray, which is convenient and quick to operate 2. Heat Exchanger Coil: copper tubing ⌀15, spacing 50X50, square arrangement; Corrugated aluminium fins, fin spacing 4.2mm and 6.4mm and 9.0mm; 3. Fans: Axial fans with High wind circle, working temperature -40°C to 60°C. High air duct design with Integral stretching, good ventilation effect, further airthrow, lower noise. Fans individually connected to junction box. Fan blade ⌀300, ⌀350, ⌀400, ⌀500, ⌀630, standard 4-pole motor; 4. Defrosting: Standard use of electric defrosting, stainless heating pipes installed in the middle of coil and inner water plate. Independent electric heating tube junction box. Hot gas defrosting or coil hot gas defrosting can also be used. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R134a, R22 and other refrigerants.

SAL - Series Ceiling Type Air Cooler

1. Housing: Made of 304 stainless steel plate, with super strong anti-corrosion performance; The cover plates on both sides and the outer water tray plate adopt a hinged structure, which is convenient and fast to operate. 2. Coil: Using 304 stainless steel pipes ⌀15. Pipe spacing 50 X 50 square arrangement, with a large heat transfer area and small heat transfer temperature difference; The operating pressure of stainless steel pipes can reach up to 5Mpa, and the burst pressure can reach up to 50Mpa. Floating coil pipes are fully automatic argon arc welding Corrugated aluminum sheets with sheet spacing of 4.2mm, 6.4mm, and 9.0mm; Direct expansion supply liquid 3. Fan: Axial fans, designed for high power and high wind pressure; The mesh cover and fan blades are made of 304 stainless steel material Operating temperature: -40 °C to 60 °C; The overall stretching high air duct design has good air guiding effect, long range, and low noise; Independent junction box; Fan specifications ⌀350 ⌀400 ⌀500 ⌀630. 4. Defrosting: The standard adopts electric defrosting, with stainless steel heating tubes evenly distributed in the fins of the coil and on the inner water plate, and an independent heating tube junction box. 5. It can meet the requirements of R404A. R507A. R448A, R449A. R134a. R22 and other refrigerants.

SUS - Series Ceiling Type Air Cooler

1. Casing: Adopt High-quality 304 stainless steel plate, with super strong anti-corrosion performance; The cover plates on both sides and the outer water tray plate adopt a hinged structure, which is convenient and fast to operate. 2. Heat Exchanger Coil: 304 stainless steel pipes ⌀15. Square arrangement with a spacing of 50 ×50 between pipes; The operating pressure of stainless steel pipes can reach up to 5Mpa, and the burst pressure can reach up to 50Mpa. Floating coil pipes are fully automatic argon arc welding 304 stainless steel fins with pitch of 4.0mm and 6.0mm; Direct expansion supply liquid 3. Fan: Axial fans, designed for high power and high wind pressure; The mesh cover and fan blades are made of 304 stainless steel material; Operating temperature: -40 C° to 60 °C; Independent junction box; Fan specifications ⌀400 ⌀500 ⌀630 4. Defrosting: The standard adopts electric defrosting, with stainless steel heating tubes evenly distributed in the fins of the coil and on the inner water plate, and an independent heating tube junction box. 5. It's can meet the requirements of refrigerants such as R404A, R507A. R448A, R449A, R134a, R22and other refrigerants. 6. Applicable Industries: Chemical cold rooms, pharmaceutical cold rooms, oil companies and food preservation. Quick and easy installation.

ND - Series Ceiling Air Cooler

1. Casing: Adopt high-quality steel plate with powder coating RAL9003; Has strong corrosion resistance; Hinged structure is adopted for both side plates and external drip tray, which is convenient and quick to operate. 2. Heat Exchanger Coil: copper tubing $15, spacing 50X50; Corrugated aluminium fins. Fin spacing 4.2mm and 6.4mm and 9.0mm. 3. Fans: Axial fans, working temperature -40°C to 60°C; Fans individually connected to junction box; Fan blade ⌀300, ⌀350, ⌀400, ⌀500, ⌀630, standard 4-pole motor. 4. Defrosting: Standard use of electric defrosting, stainless heating pipes installed in the middle of coil and inner water plate. Independent electric heating tube junction box. 5. It can meet the requirements of R404A. R507A. R448A. R449A. R134a. R22 and other refrigerants.

LS - Series Ground-Type Air Cooler

1. Casing: Adopt high-quality steel plate with powder coating RAL9003; Has strong corrosion resistance; Both side plates and external drip tray are convenient to disassemble. 2. Heat exchanger coil: Copper tubing ⌀15 , Spacing 50X50; Corrugated aluminium fins, fin spacing 6.4mm, 9.0mm &12.0mm 3. Fans: Axial fans with fan blade ⌀500 and ⌀630 , Working temperature -40°C to 60°C; Independent Fans junction box; 4. Electric Defrosting: Using stainless heating pipe, installed in the middle of coil and inner water plate; Independent electric heating pipe junction box. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R22 and other refrigerants.

LQF - Series Ground-Type Quick-Frozen Cooler

1. Casing: Adopt high-quality steel plate with powder coating RAL9003. 2. Heat exchanger coil: Copper tubing ⌀15 , Spacing 50X50; Corrugated aluminium fins, fin spacing 6.4mm, 10.0mm & 12.0mm; 3. Fans: Axial fans with blow wind type, High wind circle design, Working temperature -50°C to 60°C; Independent Fans junction box Fan blade ⌀630. 4. Electric Defrosting: Using stainless heating pipe, installed in the middle of coil and inner water plate; Independent electric heating pipe junction box. 5. It can meet the requirements of R404A, R507A, R448A, R449A, R22 and other refrigerants.

WS - Series Air Cooler with Water Defrosting

1. Casing: Adopt high-quality steel plate with powder coating RAL9003; Has strong corrosion resistance. 2. Heat exchanger coil: Copper tubing ⌀15, Spacing 50X50; Corrugated aluminium fins, fin spacing 4.2mm, 6.4mm & 9.0mm. 3. Fans: Axial fans with High wind circle, working temperature -40°C to 60°C; High air duct design with Integral stretching, good ventilation effect, further airthrow, lower noise; Fans individually connected to junction box; an blade ⌀400, ⌀500, ⌀630, standard 4-pole motor. 4. Water Defrosting: Using water defrosting method, the defrosting time is short, and the little effect on cold room temperature; Sieve pore type defrosting water pan and inner & outer water baffles are used to prevent water spraying into cold storage and wind blades during defrosting. 5. It can met thr requirements of R404A. R507A. R448A, R449A. R134a. R22 and other refrigerants.

CWS - Series Air Cooler with Long Ram and Water Defrosting

CWS/EWS series air coolers are mainly designed with long raw. CWS is mainly used in general medium and large cold storage, and EWS is mainly used in explosion-proof cold storage . 1. Casing: Adopt high-quality steel plate with powder coating RAL9003. Has strong corrosion resistance. 2. Heat exchanger coil: Copper tubing 1 5 , Spacing 50X50. Corrugated aluminium fins, fin spacing 4.2mm, 6.4mm &9.0mm. 3. Fans: CWS series adopts ordinary motor. EWS series adopts Exd I| BT explosion-proof motor, can be used in zone 1 and 2 district-level other anti explosive mixed gas space. Fan blade ⌀500 and ⌀600. 4. Water Defrosting: Using water defrosting method, the defrosting time is short, and the little effect on cold room temperature. Sieve pore type defrosting water pan and inner & outer water baffles are used to prevent water spraying into cold storage and wind blades during defrosting. 5. It can meet the requirements of R404A, R507A. R448A, R449A. R134a. R22 and other refrigerants.

GS - Series Air Cooler for Glycol Coolant

The GS series unit cooler is mainly used for cooling equipment in cold storage with glycol coolant. The low temperature glycol coolant circulate in the heat exchanger tube of the air cooler to absorb the external heat so as to reduce the storage temperature. The GS series air cooler can be used in cold storage at about 10°C, 0°C and - 18 C° respectively. 1. Casing: Adopt high-quality steel plate with powder coating RAL9003. Hinged structure is adopted for both side plates and external drip tray, which is convenient and quick to operate. 2. Heat Exchanger Coil: Copper tubing ⌀15, spacing 50×50; Corrugated aluminium fins, fin spacing 4.2mm and 6.4mm and 9.0mm. Fans: Axial fans with High wind circle, working ambient temperature -40°C to 60°C, 3. High air duct design with Integral stretching, good ventilation effect, further airthrow, lower noise, Fans individually connected to junction box. Fan blade ⌀400 ⌀500 ⌀630, standard 4-pole motor. 4. Electric Defrosting: The stainless electric heating pipe Installed ni the middle of coil and inner water plate, permits quick and efficient defrost of the coil. Independent electric heating pipes junction box.

GDB - Series Dual-Discharge Cooler for Glycol Coolant

The GDB series unit cooler is mainly used for cooling equipment in cold storage with glycol coolant. It is mainly used in large cold storage operation rooms with air inlet from below and air outlet from both sides. The GDB series air cooler can be used in cold storage at about 10°C, 0°C and - 18°C respectively. 1. Casing: Adopt high-quality steel plate with powder coating RAL9003. 224 Hinged structure is adopted for external drip tray, which is convenient and quick to operate. 2. Heat exchanger Coil: Copper tubing ⌀12 ,Spacing 38.1 × 33 Corrugated aluminium fins, fin spacing 4.2mm & 6.4mm 3. Fans: Axial fans with high wind pressure, working ambient temperature -40 to 60°C. Fans individually connected to junction box; Fan blade ⌀450, standard 4-pole motor. 4. Electric Defrosting: The stainless electric heating pipe Installed in the middle of coil and inner water plate, permits quick and efficient defrost of the coil. Independent electric heating pipes junction box.

LT - Series Ground-type Air Cooler with Water Defrost

LT series cooling fans are mainly used in horizontal floor type structure and high wind pressure air duct fan, which evenly sends the cold air into the warehouse through the air duct. 1. Casing: Adopt high-quality steel plate with powder coating RAL903. 2. Heat exchanger coil: Coper tubing$15, Spacing 50X50; Corrugated aluminium fins, fin spacing 4.2mm, 6.4mm, 10.0mm &12.0mm. 3. Fans: Motor fans with fan bladed700, Working temperature -40°C to 60°C; Independent Fans junction box; 4. Water defrosting: The defrosting spray pipe si distributed on the coil, fast defrosting, the energy consumption is small, the efficiency is high, and the influence on the temperature of the storage is small. 5. It can meet the requirements of R404A. R507A, R448A. R449A. R22 and other refrigerants.

BUZ - Series Evaporative Cooling Condensing Unit

A BUZ-series refrigeration heat-exchange unit from the local XMK product collection, presented as a vertical packaged assembly and retained under Evaporator Unit according to the source asset structure.

LWS - Series Ground-Quick Frozen Unit Cooler

A large LWS-series evaporator from the local XMK product collection, built around an exposed finned coil and multiple axial fans for cold-room air circulation.